Adb Pull Multiple Files


Answer :

You can use xargs and the result of the adb shell ls command which accepts wildcards. This allows you to copy multiple files. Annoyingly the output of the adb shell ls command includes line-feed control characters that you can remove using tr -d '\r'.

Examples:

# Using a relative path adb shell 'ls sdcard/gps*.trace' | tr -d '\r' | xargs -n1 adb pull # Using an absolute path  adb shell 'ls /sdcard/*.txt' | tr -d '\r' | sed -e 's/^\///' | xargs -n1 adb pull

adb pull can receive a directory name instead of at file and it will pull the directory with all files in it.

Pull all your gps traces in /sdcard/gpsTraces

adb pull /sdcard/gpsTraces/ .

Example of adb pull and adb push of recursive directories:

C:\Test>adb pull /data/misc/test/ . pull: building file list... pull: /data/misc/test/test1/test2/test.3 -> ./test1/test2/test.3 pull: /data/misc/test/test1/test2/test.2 -> ./test1/test2/test.2 pull: /data/misc/test/test1/test2/test.1 -> ./test1/test2/test.1 pull: /data/misc/test/test1/test.3 -> ./test1/test.3 pull: /data/misc/test/test1/test.2 -> ./test1/test.2 pull: /data/misc/test/test1/test.1 -> ./test1/test.1 pull: /data/misc/test/test.3 -> ./test.3 pull: /data/misc/test/test.2 -> ./test.2 pull: /data/misc/test/test.1 -> ./test.1 9 files pulled. 0 files skipped. 0 KB/s (45 bytes in 0.093s)  C:\Test>adb push . /data/misc/test/ push: ./test1/test2/test.3 -> /data/misc/test/test1/test2/test.3 push: ./test1/test2/test.2 -> /data/misc/test/test1/test2/test.2 push: ./test1/test2/test.1 -> /data/misc/test/test1/test2/test.1 push: ./test1/test.3 -> /data/misc/test/test1/test.3 push: ./test1/test.2 -> /data/misc/test/test1/test.2 push: ./test1/test.1 -> /data/misc/test/test1/test.1 push: ./test.3 -> /data/misc/test/test.3 push: ./test.2 -> /data/misc/test/test.2 push: ./test.1 -> /data/misc/test/test.1 9 files pushed. 0 files skipped. 0 KB/s (45 bytes in 0.062s)

./adb pull /sdcard <-- fails

./adb pull /sdcard/ <-- works recursively - note the trailing slash

Tested with Nexus 5 and adb downloaded March 2014.


Comments

Post a Comment

Popular posts from this blog

530 Valid Hostname Is Expected When Setting Up IIS 10 For Multiple Sites

Answer : Solution 1: When configured with two or more hostnames, the correct virtual host name and username must both be sent in the username by the ftp client. Separate the site name and user with the vertical line symbol: | www.example.com|MyUser So, in your FTP Client use this for the username: ftp.telefonievergelijken.nl|tv_ftp Solution 2: It appears that you're attempting to connect to the FTP site using a hostname which is not currently configured in any of the bindings to the FTP site within IIS. I base this only on the error output from Filezilla which you have included, as you have censored the hostname (even in example form) from the output, so there isn't much more to go on. You'll need to configure a binding on the FTP site which matches the hostname you are using to connect to the FTP site (whether that be from Filezilla or any other FTP client). EDIT: From your updated post information, I notice that your bindings for the FTP site are indeed in...
Read more

C Perror Example

Defined in header <stdio.h> void perror ( const char * s ) ; Prints a textual description of the error code currently stored in the system variable errno to stderr . The description is formed by concatenating the following components: the contents of the null-terminated byte string pointed to by s , followed by ": " (unless s is a null pointer or the character pointed to by s is the null character) implementation-defined error message string describing the error code stored in errno , followed by '\n' . The error message string is identical to the result of strerror ( errno ) . Parameters s - pointer to a null-terminated string with explanatory message Return value (none). Example # include <stdio.h> int main ( void ) { FILE * f = fopen ( "non_existent" , "r" ) ; if ( f == NULL ) { perror ( "fopen() failed" ) ; } else { fclose...
Read more

Android - ImageView With Rounded Only One Corner

Image
Answer : You can use the Material Components Library. With the version 1.2.0-alpha03 there is the new ShapeableImageView . Just use in your layout: <com.google.android.material.imageview.ShapeableImageView app:srcCompat="@drawable/..." ../> And in your code apply the ShapeAppearanceModel with: float radius = getResources().getDimension(R.dimen.default_corner_radius); imageView.setShapeAppearanceModel(imageView.getShapeAppearanceModel() .toBuilder() .setTopRightCorner(CornerFamily.ROUNDED,radius) .setBottomLeftCorner(CornerFamily.ROUNDED,radius) .build()); You can use this library and put your ImageView inside the Layout https://github.com/JcMinarro/RoundKornerLayouts and can set the radius for specific corners like this containerLayout.setCornerRadius(2f, CornerType.ALL); containerLayout.setCornerRadius(2f, CornerType.BOTTOM_LEFT); Other choices public final enum class CornerType private constructor() : kotli...
Read more