Can I Use The Analog Pins On The Arduino For My Project As Digital?


Answer :

You can always use the analog pins for digital writing.

  • digitalRead() works on all pins. It will just round the analog value received and present it to you. If analogRead(A0) is greater than or equal to 512, digitalRead(A0) will be 1, else 0.
  • digitalWrite() works on all pins, with allowed parameter 0 or 1. digitalWrite(A0,0) is the same as analogWrite(A0,0), and digitalWrite(A0,1) is the same as analogWrite(A0,255)
  • analogRead() works only on analog pins. It can take any value between 0 and 1023.
  • analogWrite() works on all analog pins and all digital PWM pins. You can supply it any value between 0 and 255.

The analog pins let you read/write analog values - basically, instead of giving out a voltage of 0 or 5 (as with digital), they can give a range of voltages between 0 and 5 (both as input and output). Note that the voltage during analog output is only the observed voltage with a multimeter. In reality, the analog pins send pulses of 0V and 5V signals to get an output that "looks" analog (this is PWM).

Regarding the number of pins: keep in mind that the PWM pins can be used for analog output. If you run out of pins, you can use multiplexing to make more. It is not necessary to get another Arduino.


Yes, the analog pins on the Arduino can be used as digital outputs.

This is documented in the Arduino input pins documentation, in the Pin Mapping section:

Pin mapping
The analog pins can be used identically to the digital pins, using the aliases A0 (for analog input 0), A1, etc. For example, the code would look like this to set analog pin 0 to an output, and to set it HIGH:
pinMode(A0, OUTPUT);
digitalWrite(A0, HIGH);


The analog pins on the Arduino can be used as digital pins, as pointed out by Anindo Ghosh.

However, even if you run out of pins to control your stepper motors, you dont really need to buy another board. You can simply use an intermediate component such as a register or a multiplexer to control the appropriate stepper motor.


Comments

Post a Comment

Popular posts from this blog

Converting A String To Int In Groovy

Answer : Use the toInteger() method to convert a String to an Integer , e.g. int value = "99".toInteger() An alternative, which avoids using a deprecated method (see below) is int value = "66" as Integer If you need to check whether the String can be converted before performing the conversion, use String number = "66" if (number.isInteger()) { int value = number as Integer } Deprecation Update In recent versions of Groovy one of the toInteger() methods has been deprecated. The following is taken from org.codehaus.groovy.runtime.StringGroovyMethods in Groovy 2.4.4 /** * Parse a CharSequence into an Integer * * @param self a CharSequence * @return an Integer * @since 1.8.2 */ public static Integer toInteger(CharSequence self) { return Integer.valueOf(self.toString().trim()); } /** * @deprecated Use the CharSequence version * @see #toInteger(CharSequence) */ @Deprecated public static Integer toInteger(String self) { return toInteg
Read more

"Cannot Create Cache Directory /home//.composer/cache/repo/https---packagist.org/, Or Directory Is Not Writable. Proceeding Without Cache"

Answer : if anyone pass through here, this is shorter solution: sudo chown -R $USER $HOME/.composer it seems to me the group information is missing in your command sudo chown -R <user> /home/<user>/.composer/cache/repo/https---packagist.org Shoud be sudo chown -R <user>:<group> /home/<user>/.composer/cache/repo/https---packagist.org But to avoid other permission issues, I would rather advise: sudo chown -R <user>:<group> /home/<user>/.composer/cache (you'll need access to other folders in there) and sudo chown <user>:<group> /home/<user>/.composer To make sure your user has permissions enough on the global composer folder. Mind the missing recursion so the user don't own keys created by root. If you need to find out the group: groups <user>
Read more

Android How Can I Convert A String To A Editable

Answer : As you probably found out, Editable is an interface so you cannot call new Editable() . However an Editable is nothing more than a String with Spannables, so use SpannableStringBuilder: Editable editable = new SpannableStringBuilder("Pass a string here"); If you only want to change the Spannables, never the text itself, you can use a basic SpannableString. Use Editable.Factory.getInstance().newEditable(str) From the android documentation: Returns a new SpannedStringBuilder from the specified CharSequence. You can override this to provide a different kind of Spanned.
Read more